Vintage Floral
Persian Garden
Firework
Boho
Little Builders
Boulder
Tranquil Flower
Totem
PopsyKosy vs Yay Mats: Play Mat Comparison
Quick answer: Comparing PopsyKosy and Yay Mats comes down to what each brand can state and document: material identity, thickness, origin, document scope, and ownership terms. Pull those five lines from the current Yay Mats listing and compare them against ours below — the photos won't settle it, the spec sheets will.
Side by side
| PopsyKosy | Yay Mats (verify on current listing) | |
|---|---|---|
| Construction | 100% EVA foam core + 100% EVA film surface | Check stated material family |
| Thickness | 0.5" and 1" stated options | Check stated thickness |
| Origin | Made in Taichung, Taiwan | Check stated origin |
| Format | 24" interlocking tiles — add as the play area grows | Check current format and sizes |
| Damage | Replace one tile | Check spare-part availability |
| Returns | 30-night risk-free trial with free returns, 2-year warranty | Check current policy |
How to use this comparison
Origin is one signal, not the whole answer — material identity, construction, cleaning, documentation, returns, and warranty matter too. Ask any brand for the current records behind broad safety or non-toxic claims, and check that report scope covers the product you're buying.
FAQ
Is origin the only thing that matters?
No. Origin is one signal. Material, construction, cleaning, documentation, returns, and warranty matter too.
What is PopsyKosy made of?
100% EVA foam core + 100% EVA film surface, as 24-inch interlocking tiles in 0.5-inch and 1-inch options, made in Taiwan.
Compare vs the premium category · Complete baby play mat guide · Build Your Floor
The same five questions, asked of any brand
- What is the stated construction? Foam core and surface film, named separately — not just a family name such as “EVA” or “TPU”.
- Which report covers the finished mat? A report number, the laboratory, and the date — and whether the sample was the finished construction or one raw material.
- What was tested and what was the limit? “Not detected” means something only next to the reporting limit.
- Which thickness does a fall-height figure apply to? A result for one tier does not transfer to another.
- What happens when one piece is damaged? Spare tiles, warranty length, and the return window, taken from the current policy page.
Write down the answers with the date you checked them; listings change.
What PopsyKosy publishes, report by report
- HTY25500013 (SGS / Hardline, 19 May 2025), finished construction — printing film with white foam: total lead and eight CPSIA phthalates not detected; seventeen named VOCs not detected.
- HY/2026/50068 (28 May 2026), the white EVA foam on its own: formamide not detected at a 2.00 mg/kg reporting limit.
- TX60141/2026/TY (SGS Taiwan, 3 June 2026): a tested sample measured pH 6.6 (ISO 3071).
- SHMR260300656601 (SGS Shanghai, 30 March 2026), finished part: T-peel strength 22.0 N by ASTM D1876 against a requirement of more than 14 N.
- SDHL2106008375HI (SGS-CSTC, June 2026), 1-inch Ultra Thick tier only: EN 1177:2018+A1:2023 Method 1 critical fall height 1.5 m. The 0.5-inch tier has no approved figure. A cushioned floor surface is not a certified safety device and does not replace supervision.
Every result applies only to the sample, method and date named in its own report. The reports are listed with their laboratories on our certifications page.
